Car radio pinout iso

Ground Speaker Back Right. Ground Speaker Front Right. Ground Speaker Front Left. Ground Speaker Back Left. Power suply of screen. Signal H CAN bus. Position of rectractile screen. Main permanent power suply. Signal L CAN bus. GND Screen. Ground of screen power suply. Main ground.

S call spk -. Micro -. Audio IN R. BackLight Reg. Video IN 1 -. It is not always present, sometimes only a part. Ask a question Comment Edit Submit New. ISO is a standard connector that is used in the radio unit head unit. Car audio ISO connector A pinout. According to 22 reports in our database 18 positive and 0 negative the Car Audio ISO connector pinout should be correct. Is this pinout correct. If you did publish instruction for Do-It-Yourself device with this pinout, share the link with us.

No portion of this webpage may be reproduced in any form without visible link to pinoutguide. Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application. SCV - speed-dependent volume control. This pin is used in some radio equipment to automatically boost up the volume.

It needs the output from the speed sensor. Note: If the speedometer stops working when the radio is connected, then the pin is probably grounded because radio probably uses this pin for another function, except for GALA. On some equipment this pin is used, instead, for the rear-view camera control input, which carries the 12v backup-light signal to the head unit to tell it to display video from the backup camera.