A standard aux input jack has a 3. You have to solder those three wires to the three pins of the CD changer after identifying them in the earlier step. The black wire will be soldered to the ground signal ground pin, the red one will be soldered to the right channel, and the white or yellow wire will be soldered to the left channel. If you are using the soldering iron for the first time, have some warm-up and a practice session beforehand.
After making the accurate dots, proceed to solder the aux wires to the CD changer plug. After successful mounting of the wires with the CD changer plug, you have to fix the male jack of the aux input on the dash in a way where you can easily use it to plug in your devices.
You might have to drill a slot in the dash to mount the jack. Pick the spot for the drilling carefully, and make sure there is nothing behind the spot where you will drill. Before putting the head unit back and reinstalling the dash, you should test the aux input.
Otherwise, troubleshoot the problem, and get a car audio expert on board. If you have any queries, shoot them away in our comment section.
Aux input has become a staple feature of modern car stereo systems. If your stereo has RCA inputs check its back , the initiation of aux input gets reasonably simpleton. All you need is a readymade adapter cable. Plug its two RCA input jacks in the stereo, and use its 3. After removing the stereo from the dash, you have to locate its CD changer and its pinout. You have to refer to the manual of arms of your car stereo. Step 4: Select your stereo. Step 5: Enter PIN. Step 6: Enjoy your music.
Step 2 — Connect Aux To iPhone. Connect the other end of the aux cable to the headphone jack on your iPhone. Step 3 — Select Aux Mode. None of the iPhone 12 models include a 3. Apple eliminated the audio port from its flagship iPhone models with the release of the iPhone 6s.
Step 2: Connect your Android phone. Step 3: Select the USB notifcation. Step 4: Mount your SD card. Step 5: Select USB audio source.
0コメント